Video illustrating how to install the Econofrost night cover; applicable to Econofrost 5000 Series & Econofrost 9000 Series. Note when installing Econofrost 9000 Series units, step #3 (attaching the hook) is optional (as the Econofrost 9000 Series uses magnets to keep the cover affixed to the case)
ECONOFROST XL INSTALLATION:
Video illustrating how to install the Econofrost XL unit in a Hussmann Excel Case using the pre-existing brackets
CORRECTING RE-TENSIONING ISSUE:
Video illustrating how to set tension on the Econofrost 9000 Series Night Cover spring when it will not re-tension (hold tension) - caused when the unit is disassembled incorrectly
(SPANISH) CORRECTING RE-TENSIONING ISSUE:
Econofrost Serie 9000 o 5000 (con llave Allen). Video demostrando que hacer cuando la Termo Cubierta Econofrost no se puede re-tensionar; causado cuando la unidad a sido desarmada incorrectamente
RE-FASTENING BOTTOM PROFILE RAIL:
Video illustrating how to remove and replace the bottom rail profile on the Econofrost 5000 Series Night Cover
KEEPING TENSION LOCKED IN SPRING:
Video illustrating how to disassemble the Econofrost 7000 Series Night Cover and remove the spring without losing tension
Standard Thermal Curtain Sizes
ECONOFROST thermal shields are stocked in standard linear lengths
of 4 feet, 6 feet, and 8 feet. The standard night cover units measure
a maximum of 81 inches in height.
The small gaps between night cover units when two or more night
curtains are installed adjacent to each other on long refrigeration
display
cases are accounted for in determining actual energy savings.
In general, these gaps between night covers represent an insignificant
loss of energy because cold air tends to move downward rather
than
outward. The gaps between case covers actually help the night
curtains to breathe, allowing humidity to escape from the refrigerated
display
case to grocery store aisles, and preventing condensation from
forming on the night covers.
Custom Thermal Curtain Sizes
On request, ECONOFROST night curtains can be made in custom sizes.
Standard ECONOFROST night covers are 4, 6, or 8 feet wide, but
they can be custom made in widths up to 12 linear feet.
The night curtain fabric in our standard commercial refrigeration
case cover units pulls out to a length of 80 inches. However, in
rare circumstances such as when walk-in coolers or container-fitted
coolers must be enclosed, the night curtain fabric can be custom
made in lengths up to 94 inches.
If an ECONOFROST thermal shield unit needs to be shortened slightly,
this can be accomplished with an electric aluminum cutter to
trim the non-mechanized end of the night curtain. Instructions
on how
to shorten a night cover are available on request from ECONOFROST.
Market
Group Ventures Inc.
NORTH AMERICAN HEAD OFFICE PO BOX 40, SHAWNIGAN LAKE, B.C.
CANADA, VOR 2W0
Tel: 1-250-743-1222 1-800-519-1222
Fax: 1-250-743-1221 1-888-417-1221
Français
Español
Português